Premium quality aerospace fasteners. AS/EN/JISQ 9100 certified.
High Resistant Rivets
| • |
2017 DN high resistant rivet developed to replace 2014 and 2024 rivets |
| • |
Better shear strength
(40 KSI mini) |
| • |
No ice boxing before installation |
| • |
Coating: Alodine 1000/ Alodine 1200/ Sulfuric anodizing/ Chromic anodizing |
|
|
Lightweight Solid Rivets
| • |
Titanium Columbium light weight rivets have excellent strength
(53 KSI) and strength/ density ratio (8.89)
|
| • |
TiCb is more ductile than Monel and requires less effort to install |
| • |
Even when used at a temperature of 500 ◦F, TiCb retains 60% of its room temperature strength (maximum temperature of 800 ◦F) |
| • |
TiCb is compatible with all Aluminium alloys and composite materials |
| • |
Coating: AOS, IVD, WCA8P, RIVET KOTE |
|
|
Close Tolerance Rivets
| • |
Rivet type: countersunk |
| • |
Close tolerance head diameter:
90 μm (0.0035 inch) |
| • |
Close tolerance protrusion:
50 μm (0.002 inch) |
| • |
Materials: Available in Aluminium alloy, Monel, Stainless alloy and Titanium alloy |
|
 |
Pre-Coated Rivets
| • |
Pre-coated rivets provide enhanced corrosion protection, fatigue life improvement and associated cost savings |
| • |
Coating can be used on all rivet styles in 7050 alloy, Monel and Titanium alloys |
| • |
No sealant necessary and no inspection for sealing quality |
| • |
Dry installation and no need for solvents |
| • |
Excellent paint adhesion |
|
|
Semi Tubular Rivets
| • |
Shank length tolerance: +/- 0.004 inch |
| • |
Hole depth tolerance:
+/- 0.004 inch |
| • |
Materials: Available in Titanium alloys, Inconel, Monel, Stainless steel, Steel and |
| • |
Aluminium alloys |
|
|
Tubular Rivets
| • |
Shank length tolerance:
+/- 0.004 inch |
| • |
Hole depth tolerance:
+/- 0.004 inch |
| • |
Materials: Available in Copper, Stainless steel, Steel and Aluminium alloys |
|
|
Lockbolts
| • |
High tensile and clamping force |
| • |
Used in both interference and clearance fit conditions |
| • |
Installation on fresh sealant |
| • |
No noise installation |
| • |
Grip and over-lap |
| • |
Easy to check |
|
|
Aluminium Bolts & Screws
| • |
Available in diameters from M4 to M16 |
| • |
Materials: 1050, 1100, 2017, 2024, 5056, 6082, 6101, 7050, 7075 and more. |
|
|
Fasteners for Composites - Fybrfast (ABS 0056)
| • |
No risk of composite delamination during installation |
| • |
Uniform distribution of pressure on the composite |
| • |
Easy to install |
| • |
Grip range variation: 1 mm |
| • |
Materials: Titanium T40, 304L, TiCb, Nimonic 75 |
|
|
TrafficScope XRX Collision Avoidance
Stand-alone collision avoidance systems for general aviation
|
|
TrafficScope Micro 200 Collision Avoidance
Stand-alone collision avoidance systems for general aviation
|
|
|
| |
